Ring rail through type shot blasting machine working principle

Ring rail pass shot blasting machine is a device used to clean metal surfaces, often used to remove oxide, rust, welding slag and other impurities. It is mainly composed of shot blasting machine, ring track system and working platform.

The working principle is as follows:

Preparation: Place the workpiece to be cleaned on the working platform, and set the cleaning parameters, such as cleaning time, shot blasting speed, etc.

Run the ring rail system: Start the ring rail system, so that the cleaning machine moves along the ring track, forming a closed cleaning environment.

Shot blasting process: The cleaning machine is equipped with a high-speed rotating shot blasting gun, shot blasting particles are sprayed to the surface of the workpiece to be cleaned through the gun. Shot blasting particles have a certain impact force and can remove dirt and impurities on the surface of the workpiece.

Shot blasting recovery and reuse: During the cleaning process, the shot blasting particles bounce off the surface of the workpiece and are then recovered by the recovery system. After screening and cleaning, the recovered shot blasting particles can be used again, so as to realize the recycling of shot blasting particles.

Cleaning end and check: After the cleaning time reaches the set value, stop the operation of the cleaning machine and the ring rail system. The workpiece is removed from the work platform and checked to ensure that the cleaning effect meets the requirements.

In general, the ring rail uses high-speed rotating shot blasting particles to impact the metal surface, while recovering and reusing shot blasting particles to achieve continuous and efficient cleaning operations.

Customer recommendation:
Shot blasting machine and sand blasting machine surface cleaning equipment manufacturers and Chinese manufacturers, choose a good brand,Click on the link to view:
http://www.jyrbj.cn/contact.html